Currently Empty: ₱0.00
-₱200.00
ART AV Direct – Audio/Video Direct Box
Overview The AV Direct is the ideal input solution for any application where stereo iPods, Laptop computers, consumer DVD players, Consumer HiFi equipment or video machines have to be connected to a single XLR microphone level input. Unlike standard gender bender cables or DI boxes, the AV Direct can accept virtually any input connection and …
Continue reading ART AV Direct – Audio/Video Direct Box
ART CleanBox Pro – Dual Channel Level Converter
The CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. Balanced lines offer increased immunity to external electrical noise, such as hum.
ART DRP – Dual RP Mic Preamp
The ART Dual RP Mic Preamp is the ideal solution for increasing the performance of your ribbon and dynamic microphones. This two-channel preamp brings out all of the nuances of your mic before running into your recording interface or mixer via long cable runs.
With the Dual RP you can tailor the loading on the mic through the variable impedance controls. The discrete preamp circuitry inside is designed for low noise and transparent operation. The balanced output drives long cable runs with ease allowing you to place the preamp as close as possible to the mic before picking up any noise or interference.
ART Dual Z Direct – Dual Professional Passive Direct Box
Key Features
- Fully passive, high performance transformer design. No battery required.
- Converts 50k ohm inputs into 600 ohm balanced outputs
- Switchable input attenuation (0, -20, -40 dB) Switchable low pass filter
- Switchable phase invert
- Switchable ground lift (fully isolates inputs from chassis and outputs)
- Rugged extruded aluminum case
ART HeadAMP 4 – Eight Output Stereo Headphone Amp
The HeadAmp4 offers 1/8th-inch as well as 1/4-inch inputs and outputs as well as lower noise, lower distortion and more output in a new custom extruded stackable metal case.
Ideal for virtually any home or project studio, the ARTcessories HeadAmp4 easily adds additional headphone outputs to any mixer, computer audio interface, workstation, iPod, media player or laptop without creating any additional load on the existing headphone source.
Individual level controls for the four headphone outs, 1/4-inch and now 1/8th-inch connections allow the HeadAmp4 to connect to virtually any source, and drive any headphone configuration including studio phones, in-ear monitors or custom ear pieces or any combination of the above.
ART HeadAmp6 – 6 Ch. Headphone Amp
The HeadAmp6 is a fully-featured six -channel stereo headphone amplifier that includes six auxiliary inputs to allow separate “more-me” mixes on each headphone channel.
Each output channel has a dual function Balance Control which will pan between Left & Right input of the main signal bus, or vary the mix between the main stereo signal bus and the auxiliary input for that respective channel.
Each output channel includes one front and two rear panel stereo 1/4-inch TRS head-phone jacks for ease of installation and quick patching capability. Mono, Mute L, and Mute R select buttons and on each channel select between four operating modes; 1) Stereo, 2) Mono Left, 3) Mono Right, 4) Mono Both (Left & Right) for versatile monitoring solutions. Independent output level controls on each channel personalize monitoring levels.
Input options include XLR and 1/4-inch TRS balanced inputs with matching “Thru” jacks for bridging multiple units. An additional front panel stereo 1/4-inch TRS Direct In jack for quick patch override of the rear panel inputs is included for quick insertion of any stereo source. Master Volume control sets the main signal bus level. Eight-segment precision LED level metering on the main bus and four-segment indicators on each output channel provide visual feedback of the signal level at all key points.
ART P16 – XLR Patch Bay
Key Features
- 16 channels of balanced direct signals
- High quality passive interface
- XLR connectors (female on front, male on rear)
- All connections made via reliable PCB wiring
- 19-inch 1U-high rack mount with rugged, fully shielded black all-steel enclosure
- Reversible rack ears for added system flexibility
ART RP-1 Mic Preamp
Key Features
- Switchable low cut filter 100 Hz low cut filter
- Variable impedance control (150 ohms – 10k ohms)
- Adds low-noise, clean gain (28dB @ 10k ohms, 20dB @ 600 ohms)
- Runs off +48V Phantom power supply
- Low THD discrete circuitry (<0.002% @ 1kHz typ.)
- Balanced outputs
ART S8-3Way – Eight Channel Three-Way Mic Splitter
Overview
The S8-3WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations.
Each channel provides one XLR input, one XLR direct output with two additional transformer isolated XLR outputs for a total of 3 balanced outputs from each single microphone input signal.
Typical uses would include sending 8 direct signals through the S8-3WAY to a main Front-of-house mixer, with additional feeds going to a monitor mix station while transformer balanced isolated feeds are sent to remote recording desk or used for a broadcast feed.
The ART S8-3WAY features the same high-quality musical sounding transformers used in the popular ART S8, and is housed in a standard 1U space rack-mountable steel chassis designed for years of reliable operation.
-₱145.00
ART SPLITMix4 4-Channel Passive Splitter/Mixer
ART SPLITMix4 Overview The SPLITMix4 from ART is a passive hybrid mixer that can be configured for a variety of applications. The compact unit can mix 4 stereo inputs down to a single stereo output, split a single stereo input to 4 outputs, and more. The unit has 1/4″ TRS input and output connectors, which can also accept mono TS …
Continue reading ART SPLITMix4 4-Channel Passive Splitter/Mixer
-₱1,000.00
ART T8-8 Channel Transformer/Isolator
Overview Overview The T8™ (Transformer Eight) a high quality totally passive audio interface that uses 8 transformers to separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The T8’s audio transformers have flat and wide frequency response and handle high signal levels while maintaining an isolated balanced output. …
Continue reading ART T8-8 Channel Transformer/Isolator