Avantone CK-7 >> Large Capsule Multi-Pattern FET Condenser Microphone

Product Description

Our rugged CK-7 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.

The CK-7 houses a 35mm gold-sputtered thin Mylar capsule. The CK-7 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents our commitment to quality as these normally are the type of “upgrade” components that are implemented by microphone modders/hot-rodders! Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility…It exudes class visually as well as sonically.

• Type: True Condenser
• Polar Pattern(s): Cardioid , Omni , Figure 8
• Capsule: Dual-sided 35mm center-terminated gold-sputter Mylar (6 micron)
• Frequency Response: 20-20,000 Hz +/- 3dB
• Output Impedance: <=250 Ohms
• Sensitivity: -38 dB (0 dB=1V/Pa)
• S/N Ratio: 77dB re 1Pa
• Maximum SPL: 139dB (0.5% THD @1000Hz)
• Equivalent Noise Level: (A-Weighted per IEC 286-4) < 16 dB
• Output Connector: Male XLR 3-pin
• High-Pass Switch: 80 Hz 6dB/octave
• Attenuation Switch: -10 dB
• Power Requirement: Standard 48 Volt Phantom / 5mA
• Included Accessories:
  • Shockmount
  • Wooden Box in Metal Carrying Case
• Dimensions: 187mm x 51mm / 7.5″ x 2″
• Weight: .65 kgs / 1.4 lbs
• Finish: Polished Nickel trim / Metallic Cabernet Red Body