ART HeadAmp6 – 6 Ch. Headphone Amp
The HeadAmp6 is a fully-featured six -channel stereo headphone amplifier that includes six auxiliary inputs to allow separate “more-me” mixes on each headphone channel.
Each output channel has a dual function Balance Control which will pan between Left & Right input of the main signal bus, or vary the mix between the main stereo signal bus and the auxiliary input for that respective channel.
Each output channel includes one front and two rear panel stereo 1/4-inch TRS head-phone jacks for ease of installation and quick patching capability. Mono, Mute L, and Mute R select buttons and on each channel select between four operating modes; 1) Stereo, 2) Mono Left, 3) Mono Right, 4) Mono Both (Left & Right) for versatile monitoring solutions. Independent output level controls on each channel personalize monitoring levels.
Input options include XLR and 1/4-inch TRS balanced inputs with matching “Thru” jacks for bridging multiple units. An additional front panel stereo 1/4-inch TRS Direct In jack for quick patch override of the rear panel inputs is included for quick insertion of any stereo source. Master Volume control sets the main signal bus level. Eight-segment precision LED level metering on the main bus and four-segment indicators on each output channel provide visual feedback of the signal level at all key points.
ART P16 – XLR Patch Bay
Key Features
- 16 channels of balanced direct signals
- High quality passive interface
- XLR connectors (female on front, male on rear)
- All connections made via reliable PCB wiring
- 19-inch 1U-high rack mount with rugged, fully shielded black all-steel enclosure
- Reversible rack ears for added system flexibility
ART RP-1 Mic Preamp
Key Features
- Switchable low cut filter 100 Hz low cut filter
- Variable impedance control (150 ohms – 10k ohms)
- Adds low-noise, clean gain (28dB @ 10k ohms, 20dB @ 600 ohms)
- Runs off +48V Phantom power supply
- Low THD discrete circuitry (<0.002% @ 1kHz typ.)
- Balanced outputs
ART S8-3Way – Eight Channel Three-Way Mic Splitter
Overview
The S8-3WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations.
Each channel provides one XLR input, one XLR direct output with two additional transformer isolated XLR outputs for a total of 3 balanced outputs from each single microphone input signal.
Typical uses would include sending 8 direct signals through the S8-3WAY to a main Front-of-house mixer, with additional feeds going to a monitor mix station while transformer balanced isolated feeds are sent to remote recording desk or used for a broadcast feed.
The ART S8-3WAY features the same high-quality musical sounding transformers used in the popular ART S8, and is housed in a standard 1U space rack-mountable steel chassis designed for years of reliable operation.
ART SPLITMix4 4-Channel Passive Splitter/Mixer
ART SPLITMix4 Overview The SPLITMix4 from ART is a passive hybrid mixer that can be configured for a variety of applications. The compact unit can mix 4 stereo inputs down to a single stereo output, split a single stereo input to 4 outputs, and more. The unit has 1/4″ TRS input and output connectors, which can also accept mono TS …
Continue reading ART SPLITMix4 4-Channel Passive Splitter/Mixer
ART T8-8 Channel Transformer/Isolator
Overview Overview The T8™ (Transformer Eight) a high quality totally passive audio interface that uses 8 transformers to separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The T8’s audio transformers have flat and wide frequency response and handle high signal levels while maintaining an isolated balanced output. …
Continue reading ART T8-8 Channel Transformer/Isolator
ART XDirect™ – Professional Active Direct Box
Overview The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4″ and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an …
Continue reading ART XDirect™ – Professional Active Direct Box
ART ZDirect™ – Professional Passive Direct Box
Overview The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4″ input is converted by the transformer into an isolated balanced low impedance signal source. The Zdirects …
Continue reading ART ZDirect™ – Professional Passive Direct Box
Astatic 611L Palmheld Omnidirectional Dynamic Microphone
The Astatic 611L from CAD is a palmheld omnidirectional dynamic microphone offering easy operation and voice-tailored frequency reproduction for public address and vehicular two-way communication. It features a push-to-talk thumb switch for quick momentary activation and an unterminated four-conductor, two-shield coiled cable, which extends to six feet in length. The dynamic capsule requires no power source, and its omnidirectional polar pattern provides a generous pickup area.
- Palmheld Design
- Press-to-Talk Thumb Switch
- Dynamic Capsule Requires No Power Source
- Omnidirectional Polar Pattern
- 100 Hz to 7.5 kHz Frequency Response
- Unterminated Four-Conductor Cable
- Coiled Cord Extends to 6′
- Durable Cycolac Housing
Astatic 827A Cardioid Miniature Condenser Gooseneck Microphone and 17″ Gooseneck
The Astatic 827A Condenser Gooseneck Microphone is an elegant, microphone with a slender profile, designed for mounting onto podiums, conference tables, desk surfaces, etc. The microphone features a sensitive condenser transducer with an optimized frequency response that accentuates vocal presence while minimizing low frequency noise.
- 17″ Gooseneck
- Cardioid Polar Pattern
- Condenser Transducer
- 3-pin XLR Connector
Astatic 878HL-2 Desktop Omnidirectional Dynamic Paging Microphone
The Astatic 878HL-2 from CAD is a desktop omnidirectional dynamic paging microphone intended for use with commercial paging systems in schools, restaurants, warehouses, medical facilities, and more. The dynamic capsule requires no power source, and its omnidirectional polar pattern provides a generous pickup area. A programmable switch
- Convenient Desktop Design
- Push- or Lift-to-Talk Operation
- Selectable Output Impedance
- Dynamic Capsule Requires No Power Source
- Omnidirectional Polar Pattern
- 80 Hz to 12 kHz Frequency Response
- 7′ Unterminated Four-Conductor Cable
- Durable Cycolac Housing & Die-Cast Base
- Non-Skid Feet